All construction is completely demountable and hot-dip galvanized. The special flexible design can nearly fit to every milking parlor. The structure consists of a straight  galvanized pipe  having  the  diameter of 48 mm (1½”), cast fittings, yoke holders  and  zig-zag  iron frames, 2 operator stairs, entrance and exit doors. Connections and construction type makes the product durable and robust.

The animals are placed in standing position with an angle of 30° or 60° to the milking pit. On each side, there are double parallel zigzag shaped pipes connected to each other with cast muffs. Galvanized pipes from wall to wall carry the construction and increase the durability. Galvanized back sheets exist at every stall. The space per animal is 115 cm at 30 degrees and 70 cm at 60 degrees stalls.

Classical herringbone type milking stalls on all capacities can be supplied and delivered. All the materials are hot-dip galvanized.


Gate cylinders: Exit and entrance gate controls via vacuum operated cylinders from every point in the pit is available. These vacuum operated cylinders do not need any extra compressor, connection to pulsator line in the pit of the milking system is enough to control the gates by directing valves.

Galvanized or stainless steel curb: Side sheet metals will be placed along the long side of the milking pit, in order to prevent the animals from sliding in the pit. The side sheet metals can be preferred as hot-dipped galvanized steel or stainless steel.